T12 WHS: high-risk machinery set-up, start-up, maintenance (5 marks) · Industrial Technology Timber

T12 · WHS: high-risk machinery set-up, start-up, maintenance (5 marks)

Fits: 2025 Q15 (5). Also 2016 Q16(a) risk assessment · 148 words · 5 chunks

T12.1 · Set-upSet-up: only trained, authorised operators use the machine. Check the work area is clear and well lit with non-slip floors, dust extraction connected, and the correct blade or cutter fitted, sharp and tightened, with all guards in place and adjusted.T12.2 · Start-upStart-up: wear the required PPE (safety glasses, hearing protection, dust mask) with no loose clothing or jewellery. Test the emergency stop, let the machine reach full speed before cutting, and use push sticks and fences.T12.3 · OperateDuring use, follow the safe work procedure for that machine, keep hands clear of the cutting zone, and never leave it running unattended.T12.4 · MaintenanceMaintenance: isolate the power and lock out and tag out before any adjustment or blade change. Inspect belts, blades and guards, lubricate moving parts, empty the dust collector, and replace worn parts.T12.5 · RecordsKeep a maintenance log and report and tag out faulty equipment. Regular maintenance prevents breakdowns, kickback and injuries.

← T11 T13 →